Shenzhen Xinyujie Technology Co., Ltd. Webpage Copyright 粤ICP备11071384号
Address: 2F, D Building, Huafeng First Technological Park, Sanwei, Xixiang Town, Baoan, Shenzhen, Guangdong, China
R&D department develops new product ADC fan
In order to use a wider range of cooling fans, the AC and DC power supplies can be connected to the fan without difficulty, and some AC fans can only be installed. However, AC fans have the disadvantage of small air volume. As a result, the internal temperature of the machine is too high to damage the machine in advance. Some machines can only be connected to the AC power supply and at the same time limited to the internal structure of the machine. You can only install a small type of fan, such as 6CM, 7CM, etc., and the AC fan has a minimum of 8CM, so the machine can not install the cooling system, resulting in the service life of the machine. shorten. The above problems can be solved if the DC fan can be installed. Therefore, our R&D and design personnel have continuously researched and experimentally developed the ADC fan module to solve the above problems, which solved the problem that such technology has always been blank and monopolized by foreign products.
The ADC fan module developed includes an isolated AC-DC converter that can convert 100V-240 voltage to +12V or +24V depending on fan type. The use of DC motor speed to change the wind, to increase the wind speed and air volume, so that the fan produces the maximum air flow to reduce the internal thermal resistance of the machine.
ADC fan module advantages
1, more installation models
It can be installed on any model at any time, and can be installed in any horizontal or vertical direction. (Blower and frame fan 2CM-12CM can be used)
2, enhanced cooling effect
The machine is directly connected to the AC fan. Due to the limitation of the AC fan itself, the air volume and wind speed often fail to meet the customer's requirements. Such as through the ADC cooling module; connect the DC wind, then the wind speed has significantly improved, and better guarantee the cooling effect of the machine.
3, long life, environmental protection, zero pollution
This fan kit is almost maintenance-free. No oil and gas, no pollution, fan bearings using high-speed, high temperature imported ball bearings (thus guaranteeing 100% no oil and gas).
4, low vibration
The fans have been designed with a very precise balance. The vibration rate is very low due to testing and calibration.
5, low noise
Direct drive with high-pressure, low-noise motors reduces noise during operation.